
Key words
Loader,Magazine Loader,Multi magazine loader,PCB loader,SMT magazine loader,Multi Magazine Loader -CE
Description
The Multi Magazine Loader is designed for loading of PCBs. The unit loads your production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream machine. Connect with SMT and AI productions line, safety design ensure not to break any PCB when it is pushed and thus reduce defect rate. With high accuracy, automatic counting, fault alram functions, it is required for a full range of automatic equipment.
Features
Technical Specifications:
- Magazine capacity: Top 1+ Middle 1+Down 2, total 3 magazines.
- Full CE regulations safety cover
- Selectable pitch 10mm up to 80mm
- Auto/Manual run modes
- Diameter 3mm edge Flat ESD belt
- Component clearance: top 80mm bottom 25mm
- Power: AC220V/110V, 50/60 HZ, 1 phase
- Air Pressure: 5kgf/cm2
- PCB Convey Direction: L-R ( Or R-L)
- Front rail fixed ( or rear rail fixed)
- Conveyor height:900+50/-20mm( Standard height for SMT application)
- For AI application, please specify the height requirements
Transfer
heights
900mm+/-50mm
Transfer
direction
Left to right
Lifting
platform
Max. weight loading
Above 100kg
Operation side
Front of machine
Fixed rail
Front of
machine
Interface
SMEMA
Conveyor belts
ESD flat belt
PCB edge support
3mm
Magazine change over
time
30s ( optional: 15s)
Allowable
components clearance
Top 50 mm+ below
25mm
Magazine
capacity
Top 1+down 2+
middle 1
Safety
CE certificates
Control
PLC
Voltage
220V/ 110V ,
single phase, 50-60Hz
Product Video
Specifications
Model |
Max. PCB( L *W) MM |
Min.PCB(MM) |
Machine Dimensions (L*W*H) MM |
Magazine size |
SL-250M-E |
330*250 |
50*50 |
1265*740*1650 |
355*320*563 |
SL-330L-E |
440*330 |
1580*830*1650 |
460*400*563 |
|
SL-390L-E |
530*390 |
1800*950*1650 |
535*460*570 |
|
SL-460L-E |
535*460 |
1800*1020*1650 |
535*530*570 |